Super 80 Professional – AOM
FLIGHT MANAGEMENT
Section 15 Page 20
Super 80 Professional – Aircraft Operating Manual
Coolsky, 2018
TO
Valid entries are waypoint identifiers
contained in the database or defined
geographic points:
•
Published waypoints, e.g. entered
and displayed as GOTUR.
•
Place bearing/place bearing
intersection, e.g. entered as
FLS075/KLD330, displayed as FLS76
where 76 is AFMC assigned.
•
Place bearing/distance, e.g. entered
as GRM230/22 and displayed as
GRM22, where 22 is AFMC assigned.
•
Along track offsets, entered as
waypoint/distance, e.g. LAX/-30 or
LAX/30 for 30 miles before or after
LAX.
•
VHF navaid, e.g. entered and
displayed as JFK.
•
Destination airport runway, e.g.
entered as 18L and displayed RW18L.
•
Four letter ICAO airport identifiers.
•
Latitude/longitude, e.g. entered as
N6029E00521 and displayed as
WPTXX where XX is AFMC assigned.
•
Boxes are displayed for
discontinuities (gaps in route).
•
Dashes are displayed at end of
route.
ACTIVATE
Displayed on non-active RTE page only.
After activation on the ground, the
ACTIVATE prompt is replaced with PERF INIT,
or TAKEOFF.
After actuation in flight, RTE LEGS (DIR/INTC)
page is displayed.
ACT RTE 1
The title of the route page changes to ACT
after execution.
The display is a continuation of RTE 1.
The display illustrates a route discontinuity.
An entry to connect the NEXIL waypoint with
the ALM2M approach procedure starting at
ALM is required.
PERF INIT
Displayed only on ground on active or
modified pages with incomplete PERF INIT
page entries.
Selection displays the PERF INIT page.
Delete Key (FMS CDU Keypad)
The Delete key may be used to remove any
airway, arrival or departure procedure from
the route. A delete operation will delete all
the waypoints in the procedure unless any
leg within the procedure is currently active.
In this case the active leg will remain active
and all the waypoints beyond the active
waypoint associated with the procedure are
deleted.