Super 80 Professional – AOM
NORMAL PROCEDURES
Section 3 Page 15
Super 80 Professional – Aircraft Operating Manual
Coolsky, 2018
FUEL PANEL, QUANTITY AND DISTRIBUTION ..................................................................... CHECK
43.
Check that total fuel on board is sufficient for the planned flight.
44.
Check the current fuel distribution against the Fuel Distribution Guide. (The Fuel
Distribution Guide can be found in the Aircraft Operating Manual, Section 15)
FUEL USED RESET ................................................................................................................... RESET
45.
Set the FUEL USED RESET switch to RESET (Momentary) to reset the fuel used counters.
GEAR HANDLE .................................................................................................................... DOWN
46.
Confirm that the gear handle is down and that all the three green gear lights are on.
FLAP HANDLE/INDICATOR ................................................................................................. AGREE
47.
Make sure the flaps/slats handle is in the UP/RET position.
48.
Check that the flap/slat handle and indicator agree.
HYDRAULIC QUANTITIES.................................................................................................... CHECK
49.
Check hydraulic quantities. Both gauges should read well above the red band.
TAKE-OFF WARNING SYSTEM ........................................................................................... CHECK
50.
Advance both throttles, and check that the Take-off Configuration warning sounds are
heard. Then close the throttles.
FMS/ACARS ..................................................................................... PREFLIGHT ACCOMPLISHED
51.
Please refer to the FMS guide on how to preflight the FMS.