Super 80 Professional – AOM
FLIGHT MANAGEMENT
Section 15 Page 26
Super 80 Professional – Aircraft Operating Manual
Coolsky, 2018
Hold
ACT RTE 1 LEGS
This page is used to enter a holding pattern
into the route.
HOLD AT
Accepts any geographical point as a
holding fix.
If the aircraft is on an offset path, the plane
will not enter a pre-planned holding pattern.
Present Position (PPOS)
Selection transfers the aircraft present
position to the scratchpad. The present
position can then be transferred to the
prompt boxes to create a holding pattern
with the fix at the present position when the
EXEC key is pushed.
ACT RTE 1 HOLD
This page is used to modify holding patterns.
Modifications made to a holding pattern
while active in the hold only becomes
effective on the next crossing of the holding
fix.
Used to exit holding pattern.
When multiple holding patterns are entered
into the route, push the NEXT PAGE key to
view the other holding patterns.
FIX
Identifies the inserted holding fix.
QUAD/RADIAL
Normally displays dashes.
Permits entry of holding pattern
quadrant/radial
Overrides INBD CRS/DIR
Valid entries are X/XXX and XX/XXX.