Super 80 Professional – AOM
NORMAL PROCEDURES
Section 3 Page 12
Super 80 Professional – Aircraft Operating Manual
Coolsky, 2018
BRAKE TEMPERATURE ............................................................................................................... TEST
137.
Press and hold the Brake Temperature Test button. The Brake Temperature Gauge
should slowly rise to indicate about 450°C and the Overheat light should come on.
RADAR ..................................................................................................................... TEST AND OFF
138.
Set the Mode Selector switch to TEST. The radar screen should display a green,
yellow and red test pattern. Set the Mode Selector switch back to OFF.
FMS/ACARS ..................................................................................... PREFLIGHT ACCOMPLISHED
139.
Please refer to the FMS guide on how to pre-flight the FMS.
STABILIZER TRIM ................................................................................................................. CHECK
140.
Move the LONG TRIM handle in both directions and check that the LONG TRIM
indicator moves in the appropriate direction.
SPOILER LEVER .......................................................................................................................... RET
141.
The spoiler lever should be in the RET position (forward down position).
RUDDER HYDRAULIC CONTROL ............................................................................................. PWR
142.
The RUD HYD CONT lever should be in the PWR position (forward).
REVERSE LEVERS/THROTTLES............................................................................... DOWN/CLOSED
143.
Advance both throttles, checking for freedom of movement. Check that the
Take-off Configuration warning sounds are heard. Then close the throttles.
FUEL CROSSFEED VALVE ......................................................................................................... OFF
144.
Set the FUEL X FEED lever to OFF (forward).
FUEL LEVERS ............................................................................................................................. OFF
145.
Both Fuel Levers should be in the down and OFF position. (Under the throttles
handles)
AILERON AND RUDDER TRIM .............................................................................. CHECK AND SET
146.
Check travel or both aileron and rudder trim in all directions. Then set both to zero.
AUTO BRAKE .....................................................................................................OFF AND DISARM
147.
Set the AUTO BRAKE Selector to OFF.
148.
Set the AUTO BRAKE ARM/DISARM switch to DISARM.
