Super 80 Professional – AOM
WARNING SYSTEMS
Section 24 Page 3
Super 80 Professional – Aircraft Operating Manual
Coolsky, 2018
1. BRT (Brightness) CONTROL
Adjusts the intensity of the display. Currently
not simulated.
2. RANGE SELECTOR
Selects the range to be displayed.
10
10NM range with 2 range marks at
5NM intervals.
20
20NM range with 2 range marks at
10NM intervals.
40
40NM range with 4 range marks at
10NM intervals.
80
80NM range with 4 range marks at
20NM intervals.
160
160NM range with 4 range marks at
40NM intervals.
320
320NM range with 4 range marks at
80NM intervals.
3. GAIN CONTROL
Adjusts radar receiver sensitivity. Currently
not simulated.
4. MODE SELECTOR
OFF
Turns the radar system off.
TEST
The indicator displays a test pattern
consisting of three arcs; green,
yellow and red.
WX
The indicator displays areas of high
density precipitation in red, lower
density precipitation in yellow and
light precipitation in green.
TURB Not simulated.
MAP Not simulated.
5. STAB SWITCH
ON
Engages antenna gyro stabilization,
which compensates for airplane roll
and pitch.
OFF
Disengages antenna gyro
stabilization. The antenna is aligned
to the airplane fuselage reference
plane.
6. ANTENNA TILT CONTROL
The tilt control switch is used to vary the
vertical scan plane of the outgoing radar
beam. Tilt limits are from 15° down to 15° up.