Super 80 Professional – AOM
FLIGHT MANAGEMENT
Section 15 Page 19
Super 80 Professional – Aircraft Operating Manual
Coolsky, 2018
ORIGIN
Automatically set on the RTE page if already
set on POS page 1.
Valid entries are four letter ICAO airport
identifiers contained in the database.
Entry clears previous route.
Entry is inhibited in flight for active route.
Entry transfers to POS page 1 if position has
not yet been entered on the POS page.
COMPANY ROUTE (CO ROUTE)
Loads a predefined company route from
the AFMC database.
In the Super 80 Professional this feature is
used to load P3D flight plans.
For further information on how to load P3D
flight plans into the FMS, please refer to the
General chapter under Section 15 of this
AOM.
RUNWAY
Valid entries are origin airport runways
contained in the database.
The departure runway can be entered by
line selection on the DEPARTURES page or by
manually typing in runway fix, e.g. 27R or
RW27R.
VIA
Valid entries are DIRECT or airway contained
in the database.
Airway entries are allowed only if the
waypoint on the previous line is stored in the
database as a waypoint on the selected
airways.
Procedure names (SID, STAR, etc.)
automatically appear when selected on the
DEPARTURES or ARRIVALS pages.
RTE 2
Selection displays the RTE 2 page.
Destination (DEST)
Valid entries are four letter ICAO airport
identifiers contained in the database.