Super 80 Professional – AOM
NORMAL PROCEDURES
Section 3 Page 10
Super 80 Professional – Aircraft Operating Manual
Coolsky, 2018
RADIO RACK ........................................................................................................................... FAN
96.
Set the RADIO RACK switch to FAN.
CABIN PRESSURIZATION ........................................................................................................... SET
97.
Set the System Selector switch to PRIMARY.
98.
Check that the STDBY ON and TRANSFER LOCKOUT lights are out.
99.
Set the LDG ALT to Departure Field Elevation.
100.
Set the LDG BARO to Current Altimeter Setting (press “B” on your keyboard).
101.
Set the RATE LIMIT knob to the center index.
102.
Push the FLOW light to test it.
RAIN REPELLENT ............................................................................................................ REPELLENT
103.
Set the RAIN REPELLENT switch to REPELLENT.
WINDSHIELD WIPER .................................................................................................................. OFF
104.
Set the Windshield Wiper switch to PARK, to make sure the wiper is properly parked, and
then back to OFF.
ANNUNCIATOR/DIGITAL LIGHTS ............................................................................................ TEST
105.
Push the ANNUN/DIGITAL LTS TEST switch to test all Annunciator and digital lights in the
cockpit. Carefully check all the lights on the overhead panel, main panel and pedestal
for malfunction.
AUTOLAND PRE-FLIGHT TEST .................................................................................. ACCOMPLISH
106.
Set both VHF radios to the same ILS frequency (any frequency will do, such as for
example 110.90). (Click the lower left number to switch between the two VHF radios)
107.
Set both course readouts to the same course (any course will do, for example 340).
108.
Set the FD switch to FD.
109.
Check that the NO AUTOLAND light on the FMA is out.
110.
Press the AUTO LAND button.
111.
Check that the NO AUTOLAND light flashes for a short while. If the light comes on
steady, the test has failed. If the light goes out, the test has completed successfully.
STATIC AIR SELECTOR ......................................................................................................... NORM
112.
Set the Static Air Selector switch to the NORM position.
FLIGHT INSTRUMENTS ......................................................................................................... CHECK
113.
Turn on the ND and adjust the brightness of the display using the knob on the EFIS
Dimmer panel.
114.
Turn on the PFD and adjust the brightness of the display using the knob on the EFIS
Dimmer panel.
115.
Turn on the TCAS display and adjust the brightness.
116.
On the main instrument panel, check that all gyros are erect and no flags are visible on
any of the flight instruments.
OIL QUANTITIES .................................................................................................................. CHECK
117.
Check the quantity on the Engine Display Panel Oil Quantity readout.
