Super 80 Professional – AOM
FLIGHT MANAGEMENT
Section 15 Page 24
Super 80 Professional – Aircraft Operating Manual
Coolsky, 2018
Direct To/Intercept Leg To
ACT RTE 1 LEGS Page
The Direct To page enables flying direct to
or intercepting a course to any waypoint in
the database or to any entered
geographically defined point and
subsequent linking to an existing active
route.
DIRECT TO
Valid entry is any waypoint.
The DFGS will guide the aircraft from the
present position direct to the entered
waypoint.
Intercept Leg To (INTC LEG)
Valid entry is any waypoint.
After entering a waypoint, the INTC CRS line
will appear (see next page illustration).
MOD RTE 1 LEGS Page
This page is displayed after pushing DIR/INTC
key or ACTIVATE line select key or any RTE
page, and then pushing the INTC LEG TO
line select key.
The INTC CRS prompt permits entry of a
course intercept to a waypoint. After course
entry and appropriate waypoint line
selection, EXECUTING activates the MOD RTE
and initiates the intercept leg to the
modified route.
Intercept Course (INTC CRS)
Displayed after pushing the INTC LEG TO line
select key on the direct intercept page.
The prompt permits entry of an intercept
course to the selected waypoint. After
course entry, pushing the EXEC key activates
the intercept leg to path.
ERASE
Displayed only on MOD pages.
Selection displays previous unmodified
page.
Note:
Route discontinuity will be displayed when a
DIRECT TO entry which is not an existing
down path waypoint is made. Box prompts
will invite selection of the next waypoint
after the direct to waypoint. Push the EXEC
key to active the modified route.