Super 80 Professional – AOM
FLIGHT MANAGEMENT
Section 15 Page 41
Super 80 Professional – Aircraft Operating Manual
Coolsky, 2018
FMS Initialization
Configuration identification
•
On power on the first page displayed on the FMS is the IDENT page.
•
Check and verify:
o
Model number.
o
Engine types.
o
Navigation data active date. If not current, do an update.
Position Initialization
•
Select the POS INIT page.
•
Enter a reference airport.
•
Use the reference airport position, or key in present position into the SET IRS POSITION field.
•
Note: Make sure the IRS Mode Select switches are set to NAV.
•
Check and verify:
o
Correct position displayed on LAST POS line.
o
Correct GMT displayed.
Route Initialization
•
Select the RTE page (RTE key).
•
Clear previous route:
o
Enter a new origin or re-enter the previous origin to clear the route.
•
Enter a destination airport.
•
Enter runway and route information:
o
If runway and/or SID is not known, this data may be entered later.
o
To enter a runway and/or SID:
Select departure page.
Select the appropriate runway and/or SID.
o
To enter an airway:
Enter first waypoint of the desired airway segment into TO field.
Enter airway identifier into the VIA field.
Enter last waypoint of the desired airway segment into TO field.
o
To enter a waypoint identifier or defined geographic point into the route:
Enter the name/identification/position into the TO field.
Note: Multiple navaids may share the same name. Select the appropriate
navaid on the SELECT DESIRED WPT page.
o
To enter route termination:
Enter the destination ident as the last waypoint of the route.