Super 80 Professional – AOM
NORMAL PROCEDURES
Section 3 Page 36
Super 80 Professional – Aircraft Operating Manual
Coolsky, 2018
BEFORE LANDING
BEFORE LANDING (Mechanical Checklist) (Checklist)
Use the mechanical checklist on the pedestal to accomplish the items in the Before Takeoff
checklist.
The Before Landing checklist should be performed and completed before passing over the
outer marker or final approach fix. Final flap extension may occur past the outer marker as
per schedule.
ALTIMETERS...................................................................................... RESET AND CROSSCHECKED
1.
Reset and crosscheck all altimeters. Set the barometric pressure as advised by ATC (press
B on the keyboard).
2.
Set the Decision Height reference on the Radio Altimeter as required. DH may be found
on the approach plate for the instrument approach procedure you are flying.
FLT INST & BUGS .................................................................................. SET AND CROSSCHECKED
3.
Check that none of the flight instruments have any flags visible. Crosscheck all standby
flight instruments against the primary flight instruments.
SEAT BELT/NO SMK ................................................................................................................... ON
4.
Set the Seat Belt Sign switch to ON.
5.
Set the No Smoking sign switch to ON.
6.
Make a PA to advice the Flight Attendants to prepare for landing. (Not simulated)
GEAR .......................................................................................................... DOWN, THREE GREEN
7.
Select gear down with the Gear Handle and verify that the gear is down and locked by
observing three green gear lights.
SPOILER LEVER ................................................................................................................... ARMED
8.
Arm the Spoiler lever (forward raised position).
AUTO BRAKES .......................................................................................................... AS REQUIRED
9.
Set the AUTO BRAKE Selector to MIN for normal braking.
10.
Set the AUTO BRAKE ARM/DISARM switch to ARM.
FLAPS & SLATS ....................................................................................................................... LAND
11.
Extend the flaps and slats on schedule. Avoid extension and operation near the
maximum airspeeds in order to minimize air loads on the flaps/slats. Extend flaps/slats
near the minimum airspeed for the current configuration.
ANNUNCIATOR LIGHTS ................................................................................................. CHECKED
12.
Check that no amber warning lights are on.
