CITROËN C3 Handbook Download Page 97

Page: 97 / 292

Child safety

C3Picasso_en_Chap07_securite-enfants_ed01-2015

Forward facing

Rearward facing

Child seat at the rear

Ensure that the seat belt is correctly
tensioned.

For child seats with a support leg,
ensure that this is in firm contact with

the floor. If necessary, adjust the front
seat of the vehicle.

When a rearward facing child seat is installed

on a rear passenger seat

, move the vehicle's

front seat forward and straighten the backrest
so that the rearward facing child seat does not

touch the vehicle's front seat.

When a forward facing child seat is installed

on a rear passenger seat

, move the vehicle's

front seat forward and straighten the backrest
so that the legs of the child in the forward

facing child seat do not touch the vehicle's front
seat.

Summary of Contents for C3





































































































































































































































































































Search results

Summary of Contents for C3

Reviews:

CITROËN C3, Handbook, Page: 97 / 292

Search results

Summary of Contents for C3

Reviews: