CITROËN C3, Handbook, Page: 30 / 292

Multifunction screens
28
C3Picasso_en_Chap02_ecran-multifonction_ed01-2015
Vehicle configuration
Options
Once the " Options " menu has been selected,
you can start diagnostics of the status of the
equipment (active, not active, faulty).
Language
Once the " Language " menu has been
selected, you can change the language used
by the display by selecting a language from the
list offered.
Display adjust
Once the " Display adj " menu has been selected,
you can gain access to the following settings:
- year,
- month,
- day,
- hour,
- minutes,
-
12 or 24 hour mode.
Units
Once the " Units " menu has been selected,
you can change the units of the following
parameters:
-
temperature (°C or °F),
- fuel consumption (l/100 km, mpg or km/l).
F
Once you have selected a setting, press
the "OK" button to change its value.
F
Wait for approximately ten seconds without
any action to allow the changed data to be
recorded or press the "Back" button to
cancel.
The screen then returns to the normal display.
Once the " Vehicle config " menu has been
selected, you can activate or deactivate the
following equipment:
- wiper linked with reverse gear (see the
"Visibility" section),
- guide-me-home lighting (see the "Visibility"
section).
Using this menu, you can also reinitialise the
tyre under-inflation detection system (see the
"Safety" section).
As a safety measure, configuration of
the multifunction screen by the driver
must only be done when stationary.
Once the fuel consumption unit has
been changed to mpg, the information
relating to speed and distance also
changes to miles.