CITROËN C3 Handbook Download Page 16

Page: 16 / 292

Monitoring

C3Picasso_en_Chap01_controle-de-marche_ed01-2015

Deactivation indicator lamps

Warning/indicator

lamp

is on

Cause

Action / Observations

Passenger's
airbag system

fixed.

The control switch, located at the

passenger's end of the dashboard, is
set to the

"OFF"

position.

The passenger's front airbag is
deactivated.

You can install a rearward facing

child seat on the front passenger

seat, except if there is a fault with the
airbags (airbag warning lamp on).

Set the control switch to the

"ON"

position to activate

the passenger's front airbag. In this case, do not

install a child seat in the rearward facing position.

If one of the following indicator lamps comes on, this confirms that the corresponding system has been switched off intentionally.

This is may be accompanied by an audible signal and a message in the multifunction screen.

Summary of Contents for C3





































































































































































































































































































Search results

Summary of Contents for C3

Reviews:

CITROËN C3, Handbook, Page: 16 / 292

Search results

Summary of Contents for C3

Reviews: