CITROËN C3 Handbook Download Page 132

Page: 132 / 292

Driving

130

C3Picasso_en_Chap09_conduite_ed01-2015

Stopping the vehicle

Operating fault

With the ignition on, the flashing of

AUTO

accompanied by an audible signal and a
message in the screen, indicates a malfunction

of the gearbox.

Have it checked by a CITROËN dealer or a

qualified workshop.

In all cases when parking,

you must

apply the parking brake

to immobilise

the vehicle.

When immobilising the vehicle, with

the engine running, you must place the
gear selector in neutral

Before carrying out any work in the

engine compartment, ensure that the
gear selector is in neutral

and that the

parking brake is applied.

Before switching off the engine, you can:

move to position

to engage neutral,

- leave the gear engaged; in this case, it will

not be possible to move the vehicle.

Summary of Contents for C3





































































































































































































































































































Search results

Summary of Contents for C3

Reviews:

CITROËN C3, Handbook, Page: 132 / 292

Search results

Summary of Contents for C3

Reviews: