CITROËN C3 Handbook Download Page 82

Page: 82 / 292

Visibility

C3Picasso_en_Chap05_visibilite_ed01-2015

Windscreen wash

Pull the wiper stalk towards you. The
windscreen wash, then the windscreen wipers,

operate for a pre-determined time.

Rear wiper selection ring:

park,

intermittent wipe,

wash-wipe (set duration).

Reverse gear

When reverse gear is engaged, the rear wiper
will operate if the windscreen wipers are

operating.

Programming

The function is activated or deactivated via the
multifunction screen configuration menu.
This function is activated by default.

Rear wiper

Wiping zone

The curved shape of the rear screen results in

a smaller wiping zone.

If a significant accumulation of snow or
ice is present, or when using a tailgate

bicycle carrier, deactivate the automatic

rear wiper via the multifunction screen

configuration menu.

Summary of Contents for C3





































































































































































































































































































Search results

Summary of Contents for C3

Reviews:

CITROËN C3, Handbook, Page: 82 / 292

Search results

Summary of Contents for C3

Reviews: