manualshive.com logo in svg

CITROËN C3, Handbook, Page: 143 / 292

Share
Download
CITROËN C3 Handbook Download Page 143

10

Checks

141

C3Picasso_en_Chap10_verification_ed01-2015

Bonnet

F

  Push the exterior safety catch 

B

 to the left 

and raise the bonnet.

F

  Unclip the stay 

C

 from its housing.

F

  Fix the stay in the notch to hold the bonnet 

open.

Closing

F

  Take the stay out of the support notch.

F

  Clip the stay in its housing.

F

  Lower the bonnet and release it at the end 

of its travel.

F

  Pull on the bonnet to check that it is 

secured correctly.

F

  Open the front left door.

F

  Pull the interior bonnet release lever 

A

, 

located at the bottom of the door aperture.

Opening

The location of the interior bonnet 
release lever prevents opening of the 

bonnet while the front left door is closed.

Do not open the bonnet in high winds.

When the engine is hot, handle the 

exterior safety catch and the bonnet 
stay with care (risk of burns).

Summary of Contents for C3





































































































































































































































































































Reviews:

No comments