CITROËN C3 Handbook Download Page 119

Page: 119 / 292

Safety

117

C3Picasso_en_Chap08_securite_ed01-2015

row rear centre seat belt

Removal and storing

Press the red button on the buckle

, then

on the buckle

Guide the strap as it rolls up and bring the

tongue

, then

onto the magnet of the

attachment point on the roof.

Installation

Pull the strap and insert the tongue

in the

left-hand buckle.

Insert the tongue

in the right-hand

buckle.

Check the fastening of each buckle by

pulling the strap.

The seat belt for the rear centre seat of the
2

row is incorporated at the rear left of the roof.

Seat belt unfastened warning
lamp display

When the ignition is switched on, the
corresponding warning lamps

and

come

on in red for approximately 30 seconds, if the

seat belt is not fastened.
When the engine is running or the vehicle is

moving, the corresponding warning lamp

comes on in red, accompanied by an audible

signal and a message on the multifunction
screen, if a rear passenger has unfastened
their seat belt.

Summary of Contents for C3





































































































































































































































































































Search results

Summary of Contents for C3

Reviews:

CITROËN C3, Handbook, Page: 119 / 292

Search results

Summary of Contents for C3

Reviews: