CITROËN C3 Handbook Download Page 160

Page: 160 / 292

Practical information

158

C3Picasso_en_Chap11_informations-pratiques_ed01-2015

Removing a wheel

List of operations

Remove the bolt cover from each of the

wheel bolts using the tool

(with alloy

wheels only).

Fit the security socket

to the

wheelbrace

to slacken the security bolt

(if your vehicle has them).

Slacken the other bolts using the

wheelbrace

only.

Parking the vehicle

Immobilise the vehicle where it does not

block traffic: the ground must be level,
stable and non-slippery.

Apply the parking brake, switch off the

ignition and engage first gear* to lock

the wheels.

If necessary, place a chock against the

wheel diagonally opposite the wheel to

be changed.
You must ensure that the occupants get

out of the vehicle and wait where they

are safe.
Never go underneath a vehicle

supported by a jack; use an axle stand.

* Position

for an electronic gearbox.

The jack must only be used to change a

wheel with a damaged tyre.

The jack does not require any
maintenance.

Summary of Contents for C3





































































































































































































































































































Search results

Summary of Contents for C3

Reviews:

CITROËN C3, Handbook, Page: 160 / 292

Search results

Summary of Contents for C3

Reviews: