CITROËN C3 Handbook Download Page 48

Page: 48 / 292

Comfort

C3Picasso_en_Chap03_confort_ed01-2015

Footwells.

Central and side vents.

The air distribution can be
adapted by placing the dial in an
intermediate position.

2. Air flow adjustment

Turn the dial from position

to position

to obtain a

comfortable air flow.

Windscreen, side windows and
footwells.

Turn the dial from blue

(cold) to red (hot) to adjust
the temperature to your
requirements.

Windscreen and side windows.

1. Temperature adjustment

The heating / ventilation or air conditioning systems can only operate with the engine running.

3. Air distribution adjustment

Heating / Ventilation

Manual air
conditioning

If you place the air flow control

in position

(deactivation of the

system), the temperature is no
longer maintained at a comfortable

level. However, a slight flow of air,

due to the movement of the vehicle,
can still be felt.

Summary of Contents for C3





































































































































































































































































































Search results

Summary of Contents for C3

Reviews:

CITROËN C3, Handbook, Page: 48 / 292

Search results

Summary of Contents for C3

Reviews: