CITROËN C3 Handbook Download Page 81

Page: 81 / 292

Visibility

C3Picasso_en_Chap05_visibilite_ed01-2015

Wiper controls

Manual controls

The wiper commands are issued directly by the

driver by means of the stalk

and the ring

Model with intermittent wiping

Model with AUTO wiping

Fast (heavy rain).

Normal (moderate rain).

Intermittent (proportional to the
speed of the vehicle).

Automatic, then single wipe.

Refer to the corresponding
section.

Off.

Single wipe (press down and

release).

Programming

You can modify the settings for the following

functions:

- automatic rain sensitive windscreen wipers,
- rear wiping on engaging reverse gear.

Windscreen wipers

Wiping speed selection stalk.

The vehicle's front and rear wipers are

designed to improve the driver's visibility

progressively according to the weather

conditions.

Summary of Contents for C3





































































































































































































































































































Search results

Summary of Contents for C3

Reviews:

CITROËN C3, Handbook, Page: 81 / 292

Search results

Summary of Contents for C3

Reviews: