Home
/
CITROËN
/
C3
/
Handbook

CITROËN C3, Handbook, Page: 114 / 292

Share

Page: 114 / 292

CITROËN C3 Handbook Download Page 114

Safety

112

C3Picasso_en_Chap08_securite_ed01-2015

Operating fault

Before doing anything to the system,
the pressures of the four tyres must be
checked and the system reinitialised.

The flashing and then fixed illumination of the
under-inflation warning lamp accompanied
by illumination of the Service warning lamp
indicates a fault with the system.

In this case, under-inflation monitoring of the
tyres is no longer assured.
Have the system checked by a CITROËN

dealer or a qualified workshop.

Snow chains

The system does not have to be
reinitialised after fitting or removing

snow chains.

The under-inflation alert is only
dependable if the system has been

reinitialised with all four tyres inflated to

the correct pressures.

«
...
112
113
114
115
116
...
»

Summary of Contents for C3





































































































































































































































































































Reviews:

No comments