manualshive.com logo in svg

CITROËN C3, Handbook, Page: 195 / 292

Share
Download
CITROËN C3 Handbook Download Page 195

11

Practical information

193

C3Picasso_en_Chap11_informations-pratiques_ed01-2015

"Comfort":

front and rear parking sensors, insulated 
module, reading lamp, sun blinds, head 
restraint-mounted coat hanger, centre armrest, 
air deflector, scented air freshener cartridges, 

portable ashtray, solar films for windows...

"Protection":

mats*, seat covers, mudflaps, bumper 
protectors, vehicle protective cover, dog guard, 
pet seat and boot covers...

"Transport solutions":

boot liner, boot carpet, towbar, towbar wiring 

harness, transverse roof bars, bicycle carrier, 

ski carrier, roof box, boot spacers, boot net, 

business/commercial vehicle conversion kit, 
sliding boot floor...

"Safety and security":

anti-theft alarm, warning triangle, high visibility 
vest, breathalyzer, first aid kit, snow chains, 
non-skid covers, security wheel bolts, vehicle 
tracking system, child seats, fire extinguisher, 

caravan mirror, glass security films...

"Style":

allow wheels, chromed mirror shells, leather 
steering wheel, gear lever knob, aluminium 
footrest, wheel caps...

Accessories

A wide range of accessories and genuine parts is available from the CITROËN dealer network.
These accessories and parts are all suitable for your vehicle and benefit from CITROËN's recommendation and warranty.

* 

To avoid any risk of jamming of the pedals:
-  ensure that the mat is positioned and 

secured correctly,

-  never fit one mat on top of another.

Summary of Contents for C3





































































































































































































































































































Reviews:

No comments