CITROËN C3 Handbook Download Page 176

Page: 176 / 292

Practical information

174

C3Picasso_en_Chap11_informations-pratiques_ed01-2015

Changing the LED lamps

For the replacement of this type of LED lamp,
contact a CITROËN dealer or a qualified

workshop.

Changing integral direction
indicator side repeaters

To obtain a new module, contact

a CITROËN dealer or a qualified

workshop.

If you experience any difficulty in

replacing these lamps, you can contact
a CITROËN dealer or a qualified

workshop.

While removing the module:
-

take care not to damage your vehicle's

paintwork with the screwdriver,

- do not allow the wiring and connector to

slip behind the wing.

To refit, carry out these operations in reverse
order.

Insert a screwdriver in the edge of the

repeater.

Lever with the screwdriver to extract the

repeater and pull it out.

Disconnect the wiring from the repeater.

Replace the module.

Summary of Contents for C3





































































































































































































































































































Search results

Summary of Contents for C3

Reviews:

CITROËN C3, Handbook, Page: 176 / 292

Search results

Summary of Contents for C3

Reviews: