CITROËN C3 Handbook Download Page 211

Page: 211 / 292

209

C3Picasso_en_Chap13a_RT6-2-8_ed01-2015

Towards a recent destination

Press

NAV

to display the

Navigation - guidance

" menu.

Select the desired destination and

confirm to start navigation.

Towards a contact in the directory of contacts

Select "

Select destination

" and

confirm, then select "

Directory

" and

confirm.

Selection the desired destination from

your contacts and confirm "

" to start

navigation.

Press

NAV

to display the

Navigation - guidance

" menu.

Navigation towards a contact is only possible if there is an address

entered in the audio navigation system.

Delete recent destinations

Press

NAV

to display the

Navigation - guidance

" menu.

Select "

Options

" and confirm and then

Delete recent destinations

" and

confirm.

NAVIGATION - GUIDANCE

Summary of Contents for C3





































































































































































































































































































Search results

Summary of Contents for C3

Reviews:

CITROËN C3, Handbook, Page: 211 / 292

Search results

Summary of Contents for C3

Reviews: