CITROËN C3 Handbook Download Page 106

Page: 106 / 292

Child safety

104

C3Picasso_en_Chap07_securite-enfants_ed01-2015

ISOFIX child seat recommended by CITROËN and approved for
your vehicle

"RÖMER

Duo Plus ISOFIX"

(size category

)

Group 1: from 9 to 18 kg

Installed only in the forwards facing position.

Secured to rings

, as well as the third ring

, called the TOP TETHER,

using the upper strap.

Three seat body angles: sitting, reclining, lying.

This child seat can also be used on seats which are not fitted with ISOFIX mountings. In this case, it must be attached to the vehicle seat using

the three point seat belt.

Follow the instructions for fitting the child seat given in the seat manufacturer's installation guide.

Summary of Contents for C3





































































































































































































































































































Search results

Summary of Contents for C3

Reviews:

CITROËN C3, Handbook, Page: 106 / 292

Search results

Summary of Contents for C3

Reviews: