CITROËN C3 Handbook Download Page 223

Page: 223 / 292

221

C3Picasso_en_Chap13a_RT6-2-8_ed01-2015

Configure the filtering and display of TMC messages

TMC (Traffic Message Channel) messages with GPS Navigation provide traffic information in real time.

Press the

TRAFFIC

button to display

the "

Traffic information

" menu.

Select the "

Geographic filter

" function

and confirm.

The system offers a choice of:
- "

Retain all the messages

or
- "

Retain the messages

● "

Around the vehicle

", (confirm

the mileage to modify and select
the distance),

● "

On the route

Confirm "

" to save the modifications.

We recommend:

- a filter on the route and

- a filter around the vehicle of:

- 12 miles (20 km) in urban areas,

- 30 miles (50 km) on motorways.

TRAFFIC INFORMATION

Summary of Contents for C3





































































































































































































































































































Search results

Summary of Contents for C3

Reviews:

CITROËN C3, Handbook, Page: 223 / 292

Search results

Summary of Contents for C3

Reviews: