CITROËN C3 Handbook Download Page 47

Page: 47 / 292

Comfort

C3Picasso_en_Chap03_confort_ed01-2015

The control button is
located on the heating
or air conditioning
system control panel.

Rear screen demist/defrost

Switching on

The rear screen demist/defrost can only

operate when the engine is running.

Press this button to demist/defrost the rear

screen and the door mirrors. The indicator

lamp associated with the button comes on.

Switching off

The demist/defrost switches off automatically to
prevent an excessive consumption of current.

It is possible to stop the demist/defrost

operation before it is switched off

automatically by pressing the button again.

The indicator lamp associated with the
button switches off.

Switch off the demist/defrost

of the rear screen and door
mirrors as soon as you consider

this possible as lower current

consumption results in reduced fuel
consumption.

Summary of Contents for C3





































































































































































































































































































Search results

Summary of Contents for C3

Reviews:

CITROËN C3, Handbook, Page: 47 / 292

Search results

Summary of Contents for C3

Reviews: