CITROËN C3 Handbook Download Page 179

Page: 179 / 292

Practical information

177

C3Picasso_en_Chap11_informations-pratiques_ed01-2015

Interior lighting

Interior lamps (1 / W5W)

Detach the cover of the interior lamp

with a

thin screwdriver, close to the button, to access

the faulty bulb.

Map reading lamps (2 / W5W)

Detach the cover of the interior lamp. To
access the faulty bulb, detach the partition for
the reading lamp

concerned, as necessary.

Boot lamps (W5W)

Detach the unit by pushing it rearwards.

Front courtesy lamp mood
lighting LED

For the replacement of the LED, contact a

CITROËN dealer or a qualified workshop.

Door mirror lamps (W5W)

Unclip the cover using a thin screwdriver to

access the faulty bulb.

Summary of Contents for C3





































































































































































































































































































Search results

Summary of Contents for C3

Reviews:

CITROËN C3, Handbook, Page: 179 / 292

Search results

Summary of Contents for C3

Reviews: