CITROËN C3 Handbook Download Page 244

Page: 244 / 292

242

C3Picasso_en_Chap13a_RT6-2-8_ed01-2015

AUDIO SETTINGS

They are accessible by the

MUSIC

button in the control panel or by a long
press on

RADIO

according to the source

in use.

- "

Equalizer

" (choice of 6 musical ambiences)

- "

Bass

- "

Treble

- "

Loudness

" (Activate/Deactivate)

- "

Distribution

" ("

Driver

", "

All passengers

- "

Le-Ri balance

" (Left/Right)

- "

Fr-Re balance

" (Front/Rear)

- "

Auto. Volume

" depending on road speed (Activate/Deactivate)

The audio settings (

Equalizer

Bass

Treble

and

Loudness

) are

different and independent for each sound source.
The settings for distribution and balance are common to all sources.

The distribution (or spatialisation using the Arkamys

system) of sound

is an audio process that allows the audio quality to be adapted to the

number of listeners in the vehicle.

On-board audio: Arkamys

Sound Staging optimises sound distribution

in the the passenger compartment.

Summary of Contents for C3





































































































































































































































































































Search results

Summary of Contents for C3

Reviews:

CITROËN C3, Handbook, Page: 244 / 292

Search results

Summary of Contents for C3

Reviews: