manualshive.com logo in svg

CITROËN C3, Handbook, Page: 14 / 292

Share
Download
CITROËN C3 Handbook Download Page 14

Monitoring

12

C3Picasso_en_Chap01_controle-de-marche_ed01-2015

Warning/indicator

 

lamp

is on

Cause

Action / Observations

Front foglamps

fixed.

The front foglamps are switched on 

using the ring on the lighting control 
stalk.

Turn the ring on the lighting control stalk rearward 
twice to switch off the front foglamps.

Rear foglamps

fixed.

The rear foglamps are on.

Turn the ring on the stalk rearward to switch off the 

rear foglamps.

Diesel engine 
pre-heating

fixed.

The ignition switch is at the 

2nd position (ignition on).

Wait until the warning lamp has switched off before starting.
The duration for which the warning lamp is on is determined 

by the climatic conditions.

Parking brake

fixed.

The parking brake is applied or not 
properly released.

Release the parking brake to switch off the warning 

lamp, keeping your foot on the brake pedal.
Observe the safety recommendations.
For more information on the parking brake, refer to the 
corresponding section.

Summary of Contents for C3





































































































































































































































































































Reviews:

No comments