CITROËN C3 Handbook Download Page 87

Page: 87 / 292

Fittings

C3Picasso_en_Chap06_amenagement_ed01-2015

Child surveillance mirror

Sun visor

Provides protection against sunlight from the
front or the side.

The sun visors are fitted with a courtesy mirror
with concealing flap and a ticket holder.

Glove box

This has areas for storing a bottle of water, the

vehicle's handbook, ...

To open the glove box, pull the handle

towards you.

A child surveillance mirror is installed above

the interior rear view mirror. This allows you

to monitor the vehicle’s rear passengers, or it

can facilitate conversation between the front
and rear passengers without the need to move
the rear view mirror. It can be folded away to

eliminate dazzle.

Summary of Contents for C3





































































































































































































































































































Search results

Summary of Contents for C3

Reviews:

CITROËN C3, Handbook, Page: 87 / 292

Search results

Summary of Contents for C3

Reviews: