CITROËN C3 Handbook Download Page 162

Page: 162 / 292

Practical information

160

C3Picasso_en_Chap11_informations-pratiques_ed01-2015

List of operations

Put the wheel in place on the hub.

Screw in the bolts by hand as far as

possible.

Pre-tighten the security bolt (if your vehicle

has them) using the wheelbrace

fitted

with the security socket

Pre-tighten the other bolts using the

wheelbrace

only.

Fitting a wheel

After changing a wheel

To stow the punctured wheel in the boot

correctly, first remove the central cover.
When using the "space-saver" type

spare wheel, do not exceed 50 mph

(80 km/h).
Have the tightening of the bolts and the

pressure of the spare wheel checked

by a CITROËN dealer or a qualified

workshop without delay.
Have the punctured wheel repaired

and refit it to the vehicle as soon as
possible.

Summary of Contents for C3





































































































































































































































































































Search results

Summary of Contents for C3

Reviews:

CITROËN C3, Handbook, Page: 162 / 292

Search results

Summary of Contents for C3

Reviews: