manualshive.com logo in svg

CITROËN C3, Handbook, Page: 18 / 292

Share
Download
CITROËN C3 Handbook Download Page 18

Monitoring

16

C3Picasso_en_Chap01_controle-de-marche_ed01-2015

Warning/indicator

 

lamp

is on

Cause

Action / Observations

Anti-lock 
Braking System 
(ABS)

fixed.

The anti-lock braking system has a 
fault.

The vehicle retains conventional braking.
Drive carefully at reduced speed and contact a 

CITROËN dealer or a qualified workshop without 

delay.

Dynamic 
stability control 
(DSC/ASR)

flashing.

Regulation by the system is active.

The system optimises traction and improves the 
directional stability of the vehicle.

fixed, associated with 

illumination of the indicator 
lamp in the deactivation 
button, accompanied by 
an audible signal and a 
message.

The DSC/ASR or hill start assist 
system has a fault.

Have it checked by a CITROËN dealer or a qualified 

workshop.

Engine 
autodiagnosis 
system

flashing.

The engine management system has 
a fault.

Risk of destruction of the catalytic converter.
Have it checked by a CITROËN dealer or a qualified 

workshop.

fixed.

The emission control system has a 
fault.

The warning lamp should go off when the engine is started.

If it does not go off, contact a CITROËN dealer or qualified 

workshop without delay.

Braking

fixed, associated with 
the STOP warning 

lamp.

The braking system fluid level is too 

low.

You must stop as soon as it is safe to do so.

Top up with brake fluid recommended by CITROËN.

If the problem persists, have the system checked by a 

CITROËN dealer or a qualified workshop.

+

fixed, associated with 

the STOP and ABS 

warning lamps.

The electronic brake force distribution 
(EBFD) system has a fault.

You must stop as soon as it is safe to do so.
Have it checked by a CITROËN dealer or a qualified 

workshop.

Summary of Contents for C3





































































































































































































































































































Reviews:

No comments