CITROËN C3, Handbook, Page: 161 / 292

11
Practical information
159
C3Picasso_en_Chap11_informations-pratiques_ed01-2015
F
Position the foot of the jack 2 on the
ground, ensuring that it is directly below
one of the front A or rear B jacking points
provided on the underbody, whichever is
closest to the wheel to be changed.
F
Remove the bolts and store them in a clean
place.
F
Remove the wheel.
Ensure that the jack is stable. If the ground is slippery or loose, the jack could slip or drop -
Risk of injury!
Position the jack only at one of the jacking points
A or B under the vehicle, ensuring that the
vehicle's contact area is positioned centrally on the head of the jack. Otherwise, there is a
risk of damage to the vehicle and/or the jack dropping - Risk of injury!
F
Extend the jack
2 until its head comes into
contact with the jacking point
A or B used.
The vehicle's contact area A or B must be
fully engaged with the central part of the
head of the jack.
F
Raise the vehicle until there is sufficient
space between the wheel and the ground
to admit the spare (not punctured) wheel
easily.