manualshive.com logo in svg

CITROËN C3, Handbook, Page: 194 / 292

Share
Download
CITROËN C3 Handbook Download Page 194

Practical information

192

C3Picasso_en_Chap11_informations-pratiques_ed01-2015

Fitting roof bars

To fit longitudinal and/or transverse roof bars, visit your CITROËN dealer or a qualified workshop.

Maximum authorised weight on the roof rack: 60 kg.
If the height exceeds 40 cm, adapt the speed of the vehicle to the profile of the road to avoid 
damaging the roof bars and the fixings on the roof.
Be sure to refer to national legislation in order to comply with the regulations for transporting 
objects which are longer than the vehicle.

Braking

Towing a trailer increases the braking distance.

To avoid overheating of the brakes on a long 
mountain type of descent, the use of engine 
braking is recommended.

Tyres

F

  Check the tyre pressures of the towing 

vehicle and of the trailer, observing the 
recommended pressures.

Lighting

F

  Check the electrical lighting and signalling 

on the trailer.

The rear parking sensors will be 

deactivated automatically if a genuine 

CITROËN towbar is used.

Summary of Contents for C3





































































































































































































































































































Reviews:

No comments