CITROËN C3, Handbook, Page: 156 / 292

Practical information
154
C3Picasso_en_Chap11_informations-pratiques_ed01-2015
F
Start the compressor by placing the switch
at the " I " position and adjust the pressure
to the value shown on the vehicle's tyre
pressure label.
To deflate: press the black button on the
compressor pipe, at the valve connector.
F
Once the correct pressure is reached, put
the switch to the "
O " position.
F
Remove the kit then stow it.
Tyre under-inflation
detection
After repair of the tyre, the warning
lamp will remain on until the system is
reinitialised.
For more information on under-inflation
detection, refer to the corresponding
section.
Should the pressure of one or more
tyres be adjusted, it is necessary to
reinitialise the under-inflation detection
system.
For more information on under-inflation
detection, refer to the corresponding
section.