manualshive.com logo in svg

CITROËN C3, Handbook, Page: 140 / 292

Share
Download
CITROËN C3 Handbook Download Page 140

Driving

138

C3Picasso_en_Chap09_conduite_ed01-2015

Deactivation

Reactivation

With the engine running, press button 

A

 to 

deactivate the system permanently. The 
indicator lamp in the button comes on.

The system will be deactivated 
automatically when towing a trailer or 
when a bicycle carrier is fitted (vehicle 
fitted with a towbar or bicycle carrier 

recommended by CITROËN).

In bad or wintry weather, ensure that 
the sensors are not covered with mud, 
frost or snow.

Press button 

A

 again to reactivate the system. 

The indicator lamp in the button goes off.

If there is an operating fault, when reverse gear 
is engaged, the service warning lamp comes 

on, accompanied by an audible signal (short 
beep) and a message in the multifunction 
screen.

Summary of Contents for C3





































































































































































































































































































Reviews:

No comments