Cisco SFE2000P Reference Manual Download Page 78

Page: 78 / 286

Chapter 4: Configuring Device Security

Defining 802.1x

SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide

Chapter

Port Authentication Settings Page

The

Port Authentication Settings Page

contains the following fields:

•

Port

— Indicates the port name.

•

User Name

— Displays the user name.

•

Current Port Control

— Displays the current port authorization state.

•

Admin Port Control

— Displays the admin port authorization state.

•

Enable Guest VLAN

— Specifies whether the Guest VLAN is enabled on the device. The possible

field values are:

–

Enable

— Enables using a Guest VLAN for unauthorized ports. If a Guest VLAN is

enabled, the unauthorized port automatically joins the VLAN selected in the

VLAN List

field.

–

Disable

— Disables port-based authentication on the device. This is the default.

•

Enable Periodic Reauthentication

— Permits immediate port reauthentication.

•

Reauthentication Period

— Specifies the number of seconds in which the selected port is

reauthenticated (Range: 300-4294967295). The field default is 3600 seconds.

•

Reauthenticate Now

— Specifies that authentication is applied on the device when the

Apply

button is pressed.

•

Authenticator State

— Specifies the port authorization state. The possible field values are as

follows:

–

Force-Authorized

— The controlled port state is set to Force-Authorized (forward traffic).

–

Force-Unauthorized

— The controlled port state is set to Force-Unauthorized (discard

traffic).

Summary of Contents for SFE2000P































































































































































































































































































Search results

Summary of Contents for SFE2000P

Reviews:

Related manuals for SFE2000P

Brands by name

Popular brands

Cisco SFE2000P, Reference Manual

Search results

Summary of Contents for SFE2000P

Reviews:

Related manuals for SFE2000P

Brands by name

Popular brands