Cisco SFE2000P Reference Manual Download Page 264

Page: 264 / 286

256

Chapter 16: Viewing Statistics

Managing RMON Statistics

SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide

Chapter

•

Sampling Interval

— Indicates in seconds the time that samplings are taken from the ports. The

field range is 1-3600. The default is 1800 seconds (equal to 30 minutes).

•

Sampling Requested

— Displays the number of samples to be saved. The field range is 1-65535.

The default value is 50.

•

Current Number of Samples

— Displays the current number of samples taken.

•

Owner

— Displays the RMON station or user that requested the RMON information. The field

range is 0-20 characters.

3. Click the

Add

button. The

Add RMON History Page

opens:

Add RMON History Page

The

Add RMON History Page

contains the following fields:

•

New History Entry

— Number automatically assigned to the table entry number.

•

Source Interface

— Displays the interface from which the history samples were taken. The possible

field values are:

–

Port

— Specifies the port from which the RMON information was taken.

–

LAG

— Specifies the port from which the RMON information was taken.

•

Owner

— Displays the RMON station or user that requested the RMON information. The field

range is 0-20 characters.

•

Max No. of Samples to Keep

— Indicates the number of samples to save.

•

Sampling Interval

— Indicates in seconds the time that samplings are taken from the ports. The

field range is 1-3600. The default is 1800 seconds (equal to 30 minutes).

4. Define the relevant fields.

5. Click

Apply

. The entry is added to the

RMON History Control Page

, and the device is updated.

Summary of Contents for SFE2000P































































































































































































































































































Search results

Summary of Contents for SFE2000P

Reviews:

Related manuals for SFE2000P

Brands by name

Popular brands

Cisco SFE2000P, Reference Manual

Search results

Summary of Contents for SFE2000P

Reviews:

Related manuals for SFE2000P

Brands by name

Popular brands