Cisco SFE2000P Reference Manual Download Page 276

Page: 276 / 286

268

Chapter 16: Viewing Statistics

Managing RMON Statistics

SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide

Chapter

•

Falling Threshold

— Displays the falling counter value that triggers the falling threshold alarm.

The falling threshold is graphically presented on top of the graph bars. Each monitored variable is
designated a color.

•

Falling Event

— Selects an event which is defined in the Events table that triggers the falling

threshold alarm. The Events Table is displayed in the RMON Events page.

•

Startup Alarm

— Displays the trigger that activates the alarm generation. Rising is defined by

crossing the threshold from a low-value threshold to a higher-value threshold.

•

Interval

— Defines the alarm interval time in seconds.

•

Owner

— Displays the device or user that defined the alarm

3. Define the relevant fields.

4. Click

Apply

. The RMON alarms are modified, and the device is updated.

Summary of Contents for SFE2000P































































































































































































































































































Search results

Summary of Contents for SFE2000P

Reviews:

Related manuals for SFE2000P

Brands by name

Popular brands

Cisco SFE2000P, Reference Manual

Search results

Summary of Contents for SFE2000P

Reviews:

Related manuals for SFE2000P

Brands by name

Popular brands