Cisco SFE2000P Reference Manual Download Page 17

Page: 17 / 286

Chapter 1: Getting Started
Resetting the Device

SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide

Chapter

Resetting the Device

The

Reset

page enables the device to be reset from a remote location. Save all changes to the Running

Configuration file before resetting the device. This prevents the current device configuration from being
lost. To reset the device:

1. Click

System > General > Reset

. The

Reset

page opens.

Reset Page

2. Click the

Reset

button.

ach unit can be reset individually. Resetting the stack master results in

resetting the entire stack. If the master unit is reset, the device is reset, and a prompt for a user name
and password is displayed.

3. Enter a user name and password to reconnect to the Web Interface, if the stack is not part of a full

Linksys One system. If the stack is part of a Linksys One system, login is automatically done from
the Service Router.

Logging Off The Device

1. Click

. The system logs off. The

Embedded Web System Home Page

closes.

Summary of Contents for SFE2000P































































































































































































































































































Search results

Summary of Contents for SFE2000P

Reviews:

Related manuals for SFE2000P

Brands by name

Popular brands

Cisco SFE2000P, Reference Manual

Search results

Summary of Contents for SFE2000P

Reviews:

Related manuals for SFE2000P

Brands by name

Popular brands