Cisco SFE2000P Reference Manual Download Page 129

Page: 129 / 286

121

Chapter 7: Configuring IP Information
Domain Name System

SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide

Chapter

•

Type

— Displays the IP address type. The possible field values are:

–

Dynamic

— The IP address is dynamically created.

–

Static

— The IP address is a static IP address.

•

Remove

— Removes DNS servers. The possible field values are:

–

Checked

— Removes the selected DNS server

–

Unchecked

— Maintains the current DNS server list.

•

DNS Server

— Displays the DNS server’s IP address.

•

Active Server

— Specifies the DNS server that is currently active.

2. Click the

Add

button. The

Add DNS Server Page

opens:

Add DNS Server Page

The

Add DNS Server Page

allows system administrators to define new DNS servers. The Add DNS

Server Page page contains the following fields.

•

DNS Server

— Displays the DNS server’s IP address.

•

DNS Server Currently Active

— Displays the DNS server which is currently active.

•

Set DNS Server Active

— Indicates the DNS to be server activated.

3. Define the relevant fields.

4. Click

Apply.

The DNS server is added, and the device is updated.

Summary of Contents for SFE2000P































































































































































































































































































Search results

Summary of Contents for SFE2000P

Reviews:

Related manuals for SFE2000P

Brands by name

Popular brands

Cisco SFE2000P, Reference Manual

Search results

Summary of Contents for SFE2000P

Reviews:

Related manuals for SFE2000P

Brands by name

Popular brands