Cisco SFE2000P Reference Manual Download Page 13

Page: 13 / 286

Chapter 1: Getting Started
Understanding the Interface

SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide

Chapter

This section provides the following additional information:

•

Device Representation —

Provides an explanation of the Linksys user interface buttons, including both

management buttons and task icons.

•

Using the Linksys Management Buttons —

Provides instructions for adding, modifying, and deleting

device

parameters.

Device Representation

The Linksys home page displays a graphical representation of the device:

Device Representation

he Linksys home page contains a graphical SFE2000 and SFE2000P front panel illustration.

Summary of Contents for SFE2000P































































































































































































































































































Search results

Summary of Contents for SFE2000P

Reviews:

Related manuals for SFE2000P

Brands by name

Popular brands

Cisco SFE2000P, Reference Manual

Search results

Summary of Contents for SFE2000P

Reviews:

Related manuals for SFE2000P

Brands by name

Popular brands