manualshive.com logo in svg

Cisco SFE2000P, Reference Manual

The Cisco SFE2000P is a high-performance network switch with Power over Ethernet capabilities. For detailed specifications and setup instructions, you can easily download the datasheet and user manual for free from our website. Empower your network with this reliable and efficient product.

Share
Download
background image

41

Chapter 4: Configuring Device Security
Defining Authentication

SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide

Chapter

4

–

None

 — Indicates that no authentication method is used to authenticate the port. 

2. Click the 

Add

 button. The 

Add Authentication Profile Page

 

opens:

Add Authentication Profile Page

The 

Add Authentication Profile Page 

contains the following fields:

 

•

Profile Name

 —

 

Displays the Authentication profile name.

•

Authentication Method 

— Defines the user authentication methods. The order of the authentication 

methods indicates the order in which authentication is attempted. For example, if the authentication 
method order is RADIUS, Local, the system first attempts to authenticate the user on a RADIUS 
server. If there is no available RADIUS server, then authentication is attempted on the local data 
base. Note that if the RADIUS server is available, but authentication fails, then the user is denied 
access. The possible field values are:

–

Local

 

—

 

Authenticates the user at the device level. The device checks the user name and 

password for authentication.

–

RADIUS

 

—

 

Authenticates the user at the RADIUS server.

–

 — Authenticates the user at the  server.

–

None

 — Indicates that no authentication method is used to authenticate the port. 

Modify the Authentication Profile 

1. Click 

Security Suite

 > 

Authentication

 > 

Profiles

. The 

Profiles Page

 opens:

2. Click the 

Edit 

Button. The 

Edit Authentication Profile Page opens:

Edit Authentication Profile Page 

The 

Edit Authentication Profile Page 

contains the following fields:

Summary of Contents for SFE2000P































































































































































































































































































Reviews:

No comments

Related manuals for SFE2000P

GE RSTi-EP User Manual preview
RSTi-EP
Brand: GE Pages: 425
A10 Harmony Controller 2000 Installation Manual preview
Harmony Controller 2000
Brand: A10 Pages: 27
Baby Trend TS42 Instruction Manual preview
TS42
Brand: Baby Trend Pages: 24
Baby Trend Navigator Instruction Manual preview
Navigator
Brand: Baby Trend Pages: 6
Baby Trend Expedition Instruction Manual preview
Expedition
Brand: Baby Trend Pages: 6
C3 Custom Coolers ROVER Owner'S Manual preview
ROVER
Brand: C3 Custom Coolers Pages: 16
Gascat ARGOS Installation, Operation & Maintenance Manual preview
ARGOS
Brand: Gascat Pages: 32
Maguire Products GRAVIMETRIC AUGER FEEDER MGF-ST Instruction Manual preview
GRAVIMETRIC AUGER FEEDER MGF-ST
Brand: Maguire Products Pages: 47
Magtrol DSP7000 User Manual preview
DSP7000
Brand: Magtrol Pages: 160
Atari IDEa How To Connect preview
IDEa
Brand: Atari Pages: 3
Konig KN-RCU10B Manual preview
KN-RCU10B
Brand: Konig Pages: 47
HomeMatic HM-RC-12 Operating Manual preview
HM-RC-12
Brand: HomeMatic Pages: 36
Kohler DTV+ Installation And Care Manual preview
DTV+
Brand: Kohler Pages: 48
Notifier AUTOPULSE IQ-318 Manual preview
AUTOPULSE IQ-318
Brand: Notifier Pages: 62
Pegasus Astro Dual Motor Focus Controller Manual preview
Dual Motor Focus Controller
Brand: Pegasus Astro Pages: 16
Lab-T SLX Nano User Manual preview
SLX Nano
Brand: Lab-T Pages: 17
M-system R3-NEIP1 Instruction Manual preview
R3-NEIP1
Brand: M-system Pages: 7
Smarthome 1623 IR Linc User Manual preview
1623 IR Linc
Brand: Smarthome Pages: 12

Brands by name

Popular brands

Load more brands