56
Chapter 4: Configuring Device Security
Defining Access Method
SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide
Chapter
4
–
Secure Telnet (SSH)
— Assigns SSH access to the rule. If selected, users accessing the
device using Telnet meeting access profile criteria are permitted or denied access to the
device.
–
HTTP
— Assigns HTTP access to the rule. If selected, users accessing the device using
HTTP meeting access profile criteria are permitted or denied access to the device.
–
Secure HTTP (HTTPS)
— Assigns HTTPS access to the rule. If selected, users accessing the
device using HTTPS meeting access profile criteria are permitted or denied access to the
device.
–
SNMP
— Assigns SNMP access to the rule. If selected, users accessing the device using
SNMP meeting access profile criteria are permitted or denied access to the device.
•
Source IP Address
— Defines the interface source IP address to which the rule applies.
•
Prefix Length
— Defines the number of bits that comprise the source IP address prefix, or the
network mask of the source IP address.
•
Action
— Defines the action attached to the rule. The possible field values are:
–
Permit
— Permits access to the device.
–
Deny
— Denies access to the device. This is the default.
•
Remove
— Removes rules from the selected access profiles. The possible field values are:
–
Checked
— Removes the selected rule from the access profile.
–
Unchecked
— Maintains the rules attached to the access profile.
2. Click the
Add
button. The
Add Profile Rule Page
opens:
Add Profile Rule Page
The
Add Profile Rule Page
contains the following fields:
•
Access Profile Name
— Defines the access profile name. The access profile name can contain up to
32 characters.