manualshive.com logo in svg

Cisco SFE2000P, Reference Manual

The Cisco SFE2000P is a high-performance network switch with Power over Ethernet capabilities. For detailed specifications and setup instructions, you can easily download the datasheet and user manual for free from our website. Empower your network with this reliable and efficient product.

Share
Download
background image

261

Chapter 16: Viewing Statistics
Managing RMON Statistics

SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide

Chapter

16

Add RMON Events Page

The 

Add RMON Events Page 

contains the following fields:

•

Event Entry

 — Displays the event.

•

Community

 — Displays the community to which the event belongs.

•

Description

 — Displays the user-defined event description.

•

Type

 — Describes the event type. Possible values are:

–

None

 — Indicates that no event occurred.

–

Log

 —Indicates that the event is a log entry.

–

Trap

 — Indicates that the event is a trap.

–

Log and Trap

 

— Indicates that the event is both a log entry and a trap.

•

Owner

 — Displays the device or user that defined the event.

3. Define the relevant fields.

4. Click 

Apply

. The RMON event is added, and the device is updated.

Modify Event Control Settings

1. Click 

Statistics > RMON > Events

. The 

RMON Events Page 

opens:

2. Click 

Edit

. The 

Modify Event Control Settings Page

 opens:

Summary of Contents for SFE2000P































































































































































































































































































Reviews:

No comments

Related manuals for SFE2000P

Abus FUMO50110 Quick Manual preview
FUMO50110
Brand: Abus Pages: 12
Madas M16/RM N.C. DN 65 EEX Technical Manual preview
M16/RM N.C. DN 65 EEX
Brand: Madas Pages: 44
Neets echo plus User Manual preview
echo plus
Brand: Neets Pages: 12
National Instruments NI 9871 Operating Instructions And Specifications preview
NI 9871
Brand: National Instruments Pages: 24
Gardigo 62318 Instruction Manual preview
62318
Brand: Gardigo Pages: 6
VAT 244 Series Installation, Operating, & Maintenance Instructions preview
244 Series
Brand: VAT Pages: 14
Reer MOSAIC MA2 Quick Installation Manual preview
MOSAIC MA2
Brand: Reer Pages: 2
BQT BioX Series Installation Manual preview
BioX Series
Brand: BQT Pages: 2
VAT 75.0 Series Installation, Operating, & Maintenance Instructions preview
75.0 Series
Brand: VAT Pages: 12
Ebyte E22-400T30D User Manual preview
E22-400T30D
Brand: Ebyte Pages: 25
Hanma HM-R01-RC Instructions preview
HM-R01-RC
Brand: Hanma Pages: 3
Valcom V-119RTHF Instruction Manual preview
V-119RTHF
Brand: Valcom Pages: 9
G-Tech FIELD MATE User Manual And Installation Manual preview
FIELD MATE
Brand: G-Tech Pages: 26
Graco Dynamo Lite Owner'S Manual preview
Dynamo Lite
Brand: Graco Pages: 28
Burkert 0312 Operating Instructions Manual preview
0312
Brand: Burkert Pages: 15
PXM DMX DEMUX 8 Manual preview
DMX DEMUX 8
Brand: PXM Pages: 15
JBL Six Button Remote User Manual preview
Six Button Remote
Brand: JBL Pages: 5
A-T Controls Triad Controls WE Series Installation And Operation Manual preview
Triad Controls WE Series
Brand: A-T Controls Pages: 13

Brands by name

Popular brands

Load more brands