Cisco SFE2000P Reference Manual Download Page 76

Page: 76 / 286

Chapter 4: Configuring Device Security

Defining 802.1x

SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide

Chapter

–

Disable

— Disables port-based authentication on the device. This is the default.

•

Guest VLAN ID

— Displays the Guest VLAN ID.

2. Define the relevant fields.

3. Click

Apply

. The 802.1X properties are defined, and the device is updated.

Defining Port Authentication

1. Click

Security Suite

802.1X

Port Authentication

. The

802.1X Properties Page

opens:

802.1X

Port Authentication Page

The

802.1X Port Authentication Page

contains the following fields:

•

Copy From Entry Number

— Indicates the row number from which port authentication parameters

are copied.

•

To Entry Number(s)

— Indicates the row number to which port authentication parameters are

copied.

•

Unit Number

— Displays the stacking member for which the port authentication parameters are

displayed.

•

Port

— Indicates the port name.

•

User Name

— Displays the user name.

•

Current Port Control

— Displays the admin port authorization state.

•

Guest VLAN

— Displays the Guest VLAN.

Summary of Contents for SFE2000P































































































































































































































































































Search results

Summary of Contents for SFE2000P

Reviews:

Related manuals for SFE2000P

Brands by name

Popular brands

Cisco SFE2000P, Reference Manual

Search results

Summary of Contents for SFE2000P

Reviews:

Related manuals for SFE2000P

Brands by name

Popular brands