Cisco SFE2000P Reference Manual Download Page 47

Page: 47 / 286

Chapter 4: Configuring Device Security
Passwords Management

SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide

Chapter

Add Local User Page

The

Add Local User Page

contains the following fields:

•

User Name

— Displays the user name.

•

Password

— Specifies the new password. The is not displayed. As it entered an "*" corresponding

to each character is displayed in the field. (Range: 1-159 characters)

•

Confirm Password

— Confirms the new password. The password entered into this field must be

exactly the same as the password entered in the

Password

field.

Modifying the Local User Settings

1. Click

Security Suite

Passwords Management

User Authentication

. The

User Authentication

Page Opens:

2. Click the

Edit

Button. The

Local User Settings Page

opens:

Local User Settings Page

The

Local User Settings Page

contains the following fields:

•

User Name

— Displays the user name.

•

Password

— Specifies the new password. The password is not displayed. As it entered an "*"

corresponding to each character is displayed in the field. (Range: 1-159 characters)

•

Confirm Password

— Confirms the new password. The password entered into this field must be

exactly the same as the password entered in the

Password

field.

3. Define the relevant fields.

4. Click

Apply

. The local user settings are modified, and the device is updated.

Summary of Contents for SFE2000P































































































































































































































































































Search results

Summary of Contents for SFE2000P

Reviews:

Related manuals for SFE2000P

Brands by name

Popular brands

Cisco SFE2000P, Reference Manual

Search results

Summary of Contents for SFE2000P

Reviews:

Related manuals for SFE2000P

Brands by name

Popular brands