Cisco SFE2000P Reference Manual Download Page 118

Page: 118 / 286

110

Chapter 6: Configuring VLANs

Defining Interface Settings

SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide

Chapter

•

PVID

— Assigns a VLAN ID to untagged packets. The possible values are 2 to 4094. VLAN 4095

is defined as per standard and industry practice as the discard VLAN. Packets classified to the
Discard VLAN are dropped.

•

Frame Type

— Packet type accepted on the port. Possible values are:

–

Admit Tag Only

— Indicates that only tagged packets are accepted on the port.

–

Admit All

— Indicates that both tagged and untagged packets are accepted on the port.

•

Ingress Filtering

— Enables or disables Ingress filtering on the port. Ingress filtering discards

packets which do not include an ingress port.

3. Define the relevant fields.

4. Click

Apply

. The VLAN Interface settings are modified, and the device is updated.

Summary of Contents for SFE2000P































































































































































































































































































Search results

Summary of Contents for SFE2000P

Reviews:

Related manuals for SFE2000P

Brands by name

Popular brands

Cisco SFE2000P, Reference Manual

Search results

Summary of Contents for SFE2000P

Reviews:

Related manuals for SFE2000P

Brands by name

Popular brands