manualshive.com logo in svg

Cisco SFE2000P, Reference Manual

The Cisco SFE2000P is a high-performance network switch with Power over Ethernet capabilities. For detailed specifications and setup instructions, you can easily download the datasheet and user manual for free from our website. Empower your network with this reliable and efficient product.

Share
Download
background image

195

Chapter 11: Configuring SNMP
Defining Trap Management

SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide

Chapter

11

•

User Name 

— Defines the user to whom SNMP notifications are sent.

•

Security Level 

— (SNMP v3) Defines the means by which the packet is authenticated. The possible 

field values are:

–

No Authentication

 — Indicates the packet is neither authenticated nor encrypted.

–

Authentication

 — Indicates the packet is authenticated.

–

Privacy

 — Indicates the packet is both authenticated and encrypted.

The UDP Port Notification Recipient area contains the following fields: 

•

UDP Port 

— Displays the UDP port used to send notifications. The default is 162.

•

Filter Name 

— Indicates if the SNMP filter for which the SNMP Notification filter is defined. 

•

Timeout 

— Indicates the amount of time (seconds) the device waits before re-sending informs. The 

default is 15 seconds.

•

Retries —

 Indicates the amount of times the device re-sends an inform request. The default is 3 

seconds.

3. Define the relevant fields.

4. Click 

Apply

. The SNMP Notification Receivers are defined, and the device is configured.

Summary of Contents for SFE2000P































































































































































































































































































Reviews:

No comments

Related manuals for SFE2000P

Bang & Olufsen Beolink 1000 Service Manual preview
Beolink 1000
Brand: Bang & Olufsen Pages: 9
Bang & Olufsen Beolink 1000 User Manual preview
Beolink 1000
Brand: Bang & Olufsen Pages: 12
Hach SC1500 User Manual preview
SC1500
Brand: Hach Pages: 86
Samsung SolarCell Remote Operating Instructions preview
SolarCell Remote
Brand: Samsung Pages: 2
ABC Design Tandem Instructions For Use Manual preview
Tandem
Brand: ABC Design Pages: 38
easydriver Pro Installation And Instruction Manual preview
Pro
Brand: easydriver Pages: 26
Calsense CS3000 Quick Start Manual preview
CS3000
Brand: Calsense Pages: 10
ABC Design Rodeo Instructions Manual preview
Rodeo
Brand: ABC Design Pages: 10
ABC Design Astro Instruction Manual preview
Astro
Brand: ABC Design Pages: 10
Cabletron Systems SmartSwitch 6000 Installation & User Manual preview
SmartSwitch 6000
Brand: Cabletron Systems Pages: 76
National Instruments IC-3173 Getting Started Manual preview
IC-3173
Brand: National Instruments Pages: 14
National Instruments SCXI-1104 Manual preview
SCXI-1104
Brand: National Instruments Pages: 11
Nauticam 25624 Instruction Manual preview
25624
Brand: Nauticam Pages: 2
National Instruments NI 9265 Getting Started Manual preview
NI 9265
Brand: National Instruments Pages: 18
National Instruments PXIe-4310 Calibration Procedure preview
PXIe-4310
Brand: National Instruments Pages: 10
National Instruments cRIO-9032 Getting Started Manual preview
cRIO-9032
Brand: National Instruments Pages: 20
NAPCO GEMINI C Series Installation Instructions Manual preview
GEMINI C Series
Brand: NAPCO Pages: 24
YASKAWA Z1000 CIMR-ZU*A Series Programming Manual preview
Z1000 CIMR-ZU*A Series
Brand: YASKAWA Pages: 340

Brands by name

Popular brands

Load more brands